4CH FULL HD 1080P BUS Mobile Network Video Recorder(MNVR)

4CH Single HDD/SSD, Full HD, 1080P/720P, GPS/Glonass/Baidou, 4G LTE, H.265/H.264, 1*RS232+1*RS485, G-sensor, RJ45, WIFI, Support Intercom, ADAS, DSM, BSD, Seat belt detection, AHD camera, Support: 4*AHD / 4*AHD+1*IPC / 2*AHD+2*IPC / 4*IPC, Mobile NVR/MNVR.

  • Item NO.:

  • Order(MOQ):

  • Payment:

  • Product Origin:

  • Color:

  • Shipping Port:

  • Lead Time:

    Sample in 1-3 work days, big order in 7-30 work days.
Product Detail

4CH FULL HD 1080P BUS Mobile Network Video Recorder(MNVR)

Product advantages:

TS-610F-X, this is cost-effective 4CH mobile NVR solution, designed for transportation surveillance, equipped with a high-speed processor and an embedded operating system, integrating state-of-the-art H.265 video compression/decompression technology and GPS positioning technology in the IT industry. The MNVR simulataneously records full HD 1080p real-time video for 4 cameras and provide four simultaneous video output channels.

Product introduction:

  • Support 2.5inch HDD, 4TB max, SD card + HDD dual storage optional .
  • H.264/H.265 compression, Linux system, dual stream.
  • 4/8CHs 720P/1080P real time video recording, audio sync recording.
  • Support timing, trigger, manual JPEG picture capture function.
  • Intercom for 2-way communication function optional.
  • Support remote download and playback(Significant time and flow savings by file segment orprecision to seconds).
  • TES error correcting file system to prevent data from video losing.
  • Support alarm pre-recording, motion detection, alarm linkage.
  • Can built-in 3G/4G, WiFi, GPS.
  • 1*RS-232, 1*RS-485, 1*VGA output optional.
  • Support external device, such as LED monitor, station announcement, ID card reader,people counting camera etc.
  • With car black box function, records important information such as speed, position, acceleration of gravity, braking, reversing, turning, and alarm etc.
  • DC8-36V power supply, industry embedded design, anti-shock,anti-vibration.4CH IP mobile NVR

Product Feature:

  • Embedded Linux operating system

  • H.265/H.264 compression
  • AI MDVR, With ADAS & DSM & BSD extension
  • 4CH full HD 1080P/720P real time video recording, audio sync recording.
  • 1* HDD (max 4TB) + 1*SD card (max 256GB)
  • Industry embedded design, military grade anti-vibration.
  • High-Reliability and Cost-effective.
  • Supports up to 4ch 1080p IP cameras
  • Smart H.245 video compression algorithm
  • Supports up to 4TB HDD/SSD and SD card for recording.
  • Support integration with ADAS and DSM
  • Support GPS/4G/WIFI modules built-in
  • Dual streams for local recording and wireless transmission

Product Parameter:


Equipment parameter

performance standard



TS-610X MNVR Series


Operation system


Operation interface

Graphical menu operation interface

Interface language

Chinese, English, Portuguese, Russian, French, Turkish


File system

TES error correction encryption file management system

Video input

4CHs IPC/AHD 1080P input

VGA output

1CH, support 1920*1080, 1280*720, 1024*768 resolution

CVBS output

1CH aviation connector output PAL/NTSC, 1.0Vp-p, 75Ω,CVBS

Video display

1CH/ 4 CHs

Video standard

PAL:25Frames /s;NTSC:30Frames /s

System resource

PAL:100Frames /s, NTSC:120Frames /s


Audio input

4CHs independent input,600Ω

Audio output

1CH output,600Ω,1.0-2.2V

Record format

Synchronized video & audio recording

Audio compression


Video standard


Active Safety Assisted Driving System


1CH DSM video input, support safety alarm of yawning, calling, smoking, blocked and device malfunction, etc.


1CH BSD video input, support safety alarm of pedestrians, non-motorized vehicles, including front, side and back.


1CH BSD video input, support safety alarm of pedestrians, non-motorized vehicles(bicycles, motorcycles,

electric bicycles, tricycles,etc), including front, side and back.

Digital processing and storage

Image format


Image quality

1-14 levels adjustable (1 is the best)

Video Bit-rate

192Kbps-8Mbps(each channel)

Video storage


Playback resolution


Audio Bit-rate

4KByte/s(each channel)

HDD storage

2.5inch SATA HDD (7mm), Max 4TB

SD card storage

1*SD card slot, Support 64GB/128GB/256GB


Alert input

4CHs independent alarm input(High/Low level voltage)

Alert output

2CH alarm output(High level voltage)

Motion detection



HOST interface

1*USB2.0 port in front board



1 RJ45 optional, 10M/100M/1000M adaptive


Built-in WiFi module optional (IEEE 802.11b/g/n ), 2.4GHz or 5.8GHz optional


Built-in 3G/4G(FDD-LTE/TD-LTE/WCDMA/CDMA200) module optional



Built-in GPS/ GLONASS module optional

Other external port

TTL_UART output

2 TTL_UART output(can be RS232 or RS485)


1*RS232 optional


1*RS485 optional


1*MIC input optional


Built-in G-Sensor module optional


Power supply and consumption

DC8-36V 5%≤12W

Operating Tem/humidity





1.04KG(without HDD)


1.14KG(without HDD)

Product Application:

4CH Durable HDD MNVR work in bus, truck, train and forklift, etc. for vehicle security video surveillance.


1: MDVR does not start?

a: Please check the power supply of the host to see if the power of the host is connected correctly and whether there is real voltage to the host

b: Whether the key switch of the host is locked

c: Whether the ignition control line of the host is connected properly,

d: whether there is a control voltage input (when testing in the office, the ignition control line is directly connected to the positive pole of the host power input)

2:The hard disk video recorder automatically restarts after a few minutes of startup or often crashes?

a: Input voltage is unstable or too low

b: The hard disk wiring is loose or poorly connected

c: Hard disk has bad sectors

d: Poor heat dissipation, too much dust, and the machine operating environment is too harsh

e: Inadequate installation of anti-vibration facilities

3:The remote control does not work?

a: Check the power section on the remote control

b: If the hard disk is installed, check whether the hard disk is inserted in place

4:Can't enter the settings menu?

The factory default of this machine is to automatically record when the system is started, unless it is manually stopped or the system is powered off;

to enter the setting menu, you must first stop the recording with the stop button on the remote control, and then press the menu button to enter.

Leave A Message

If you are interested in our products and want to know more details , please leave a message here , we will reply you as soon as we can.

Leave A Message

Leave A Message
If you are interested in our products and want to know more details , please leave a message here , we will reply you as soon as we can.